3.5. LED Indicators
LED
Status
Description
ON
OFF
Unit has no power
GREEN
All OK, no alarm condition
RED
Alarm condition, or until unit has started up.
(Alarm conditions are configurable, see WeOS
Management Guide)
BLINK
Location indicator ("Here I am!"). Activated
when connected to WeConfig tool, or upon
request from web or/and CLI. RED BLINK
during boot indicates pending cable factory
reset.
RSTP
OFF
RSTP disabled
GREEN
RSTP enabled
BLINK
Unit selected as RSTP/STP root switch
FRNT
OFF
FRNT disabled
GREEN
FRNT OK
RED
FRNT error
BLINK
Unit configured as FRNT focal point
DC
OFF
Unit has no power
GREEN
Power OK on DC1 and DC2
RED
Power failure on DC1 or DC2
X1 to X12
OFF
No link
GREEN
Link established
GREEN
FLASH
Data traffic indication
YELLOW
Port alarm, or port is set in blocking state by
link redundancy protocol
Table 8. LED indicators
3.6. Dimensions
Dimensions are stated in millimetres
Viper 12A Series
13
Summary of Contents for Viper 12A Series
Page 23: ...23 Viper 12A Series ...
