background image

2

6641-22501

Legal information

The contents of this document are provided “as is”. Except as required by applicable law, no warranties of any kind, 

either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a 

particular purpose, are made in relation to the accuracy and reliability or contents of this document. Westermo 

reserves the right to revise this document or withdraw it at any time without prior notice.

Under no circumstances shall Westermo be responsible for any loss of data or income or any special, incidental, 

and consequential or indirect damages howsoever caused.

More information about Westermo can be found at 

http://www.westermo.com

Software tools

Related software tools are available in the folder software tools under technical support on the 
Westermo website.

License and copyright for included Free/Libre Open Source Software

This product includes software developed by third parties, including Free/Libre Open Source Software (FLOSS). 

The specific license terms and copyright associated with the software are included in each software package 

respectively. Please visit the product homepage for more information.

Upon request, the applicable source code will be provided. A nominal fee may be charged to cover shipping and 

media. Please direct any source code request to your normal sales or support channel.

Summary of Contents for Viper-112A-P8-HV





















Reviews: