13
6619-2202
Windows configuration tool TD-Tool
The TD-Tool is a PC – application program with a graphical interface for easy
configuration of the complex functions found on the encolsed CD or at the Westermo
website.
Please refer to TD-Tool for a complete description of the functionality of the Windows
program.
AT-Commands
Please refer to the AT Commands Interface Guide found on the enclosed CD or at
the Westermo website for a complete list of all available AT-commands and a detailed
description of the serial AT-command interface.
Configuration
The TDW-33 can be configured both from the local DTE interface and remotely over
the PSTN network. Whether the local or remote interface is used the configuration
can be made with AT-commands or with a PC-based application configuration tool.
The TDW-33 can be configured from a remote modem. To configure a TDW-33 any GSM,
ISDN or PSTN modem can be used.
The modem used to configure is referred as the “local modem”.
Please make sure that the remote TDW-33 is connected to the PSTN network and is
powered up.
… Connect the local modem to it's media (ISDN, PSTN or GSM)
… Connect the PC's com-port to the DTE interface of the local modem.
… Connect the power supply.
… Start a terminal emulation program (i.e. Windows Hyper-Terminal).
… Configure the local modem data rate and word format.
… Set up a connection to the remote TDW-33 to be configured by using the normal
dial command: ATD<No><CR>. When connected send the remote escape sequence
<++++>. The called remote TDW-33 will acknowledges by requesting the remote
password. Enter the correct password (default: no password, just return). Next; con-
figure the remote TDW-33 using AT-commands. The password for remote configura-
tion is defined with AT*WRCP – Remote configuration password.
… Configure the parameter on the remote TDW-33 from your terminal program and
save the settings with AT&W.
… Hang up the connection using the ATH command.
