Westermo PMI-110-F2G, User Manual

Page: 196 / 240

192
Once you finish configuring the settings, click on
Apply / Add to apply your
configuration.
4.11.2 IP Security
In IP Security section, you can set up specific IP addresses to grant authorization
for management access to this PMI via a web browser or Telnet.
IP Security : Select Enable and Apply to enable IP security function.
Add Security IP : You can assign specific IP addresses, and then press Add . Only
these IP addresses can access and manage PMI via a web browser or Telnet. Max
security IP is 10.
Security IP List : This table shows you added security IP addresses. You can press
Remove to delete, Reload to reload the table.
Once you finish configuring the settings, click on Apply to apply your
configuration
.
4.11.3 IEEE 802.1x
4.11.3.1 802.1X configuration