Westermo PMI-110-F2G, User Manual, Page: 171 / 240

167
CoS values 4 and 5 are mapped to physical Queue 2, the middle physical queue.
CoS values 6 and 7 are mapped to physical Queue 3, the high physical queue.
After configuration, press Apply to enable the settings.
4.8.3 DSCP-Queue Mapping
This page is to change DSCP values to Physical Queue mapping table. Since the
switch fabric of PMI only supports 4 physical queues, Lowest, Low, Middle and
High. Users should therefore assign how to map DSCP value to the level of the
physical queue. In PMI, users can freely change the mapping table to follow the
upper layer 3 switch or routers’ DSCP setting.