Westermo ODW-720-F1, User Manual

Page: 14 / 18

14 6651-2221
S2 S1
The ODW-720-F1 DIP-switches are pre-set from the factory, so that the unit can be
used for point-to-point applications, togheter with an additional ODW-720-F1, straight
out of the box, without the need for any type of user configuration.
The only choise required, is if to enable the RTS to CTS signalling function or not.
See the DIP-switch S2:1 description below.
If the ODW-720-F1 is to be used in a multidrop network togheter with ODW-720-F2
units, please refer to the ODW-720-F2 user guide for details on how to configure the
units.
S1 DIP-switch
ON
1 2 3 4 5 6 7 8
S1:1 – S1:8 always OFF for
point-to-point applications.
S2 DIP-switch
ON
1 2 3 4 5 6 7 8
CTS always active.
ON
1 2 3 4 5 6 7 8
S2:2 and S2:4 – S2:7 always OFF.
S2:3 and S2:8 always ON for
point-to-point applications.
ON
1 2 3 4 5 6 7 8
Transport RTS to CTS.
Factory default
ON
1 2 3 4 5 6 7 8
S1
ON
1 2 3 4 5 6 7 8
S2
CAUTION - ELECTROSTATIC DISCHARGE (ESD)
Prevent electrostatic discharge damages to internal electronic
parts by discharging your body to a grounding point (e.g. use a
wrist strap).
DIP-switch settings