23
Available command lists of the global configuration mode.
(VLAN) Interface Configuration:
Type
interface VLAN
VLAN-ID
in global
configuration mode and you will then enter VLAN interface configuration mod,
where you can configure the settings for the specific VLAN.
The VLAN interface name of VLAN 1 is VLAN 1, VLAN 2 is VLAN 2…
Type
exit
to leave the mode. Type
?
to see the available command list.
The command lists of the VLAN interface configuration mode.
Switch(config)# interface vlan 1
Switch(config-if)#
description
Interface specific description
end
End current mode and change to enable mode
exit
Exit current mode and down to previous mode
ip
Interface Internet Protocol config commands
list
Print command list
no
Negate a command or set its defaults
quit
Exit current mode and down to previous mode
shutdown
Shutdown the selected interface
Switch(config)# interface fa1
Switch(config-if)#
acceptable
Configure 802.1Q acceptable frame types of a port.
auto-negotiation Enable auto-negotiation state of a given port
description
Interface specific description
duplex
Specify duplex mode of operation for a port
end
End current mode and change to enable mode
exit
Exit current mode and down to previous mode
flowcontrol
Set flow-control value for an interface
garp
General Attribute Registration Protocol
ingress
802.1Q ingress filtering features
lacp
Link Aggregation Control Protocol
list
Print command list
loopback
Specify loopback mode of operation for a port
mac
MAC interface commands
mdix
Enable mdix state of a given port
no
Negate a command or set its defaults
qos
Quality of Service (QoS)
quit
Exit current mode and down to previous mode
rate-limit
Rate limit configuration
shutdown
Shutdown the selected interface
spanning-tree spanning-tree protocol
speed
Specify the speed of a Fast Ethernet port or a
Gigabit Ethernet port.
switchport
Set switching mode characteristics
