NOTE
If the product is powered by PoE, the protective dust cap which is part of
the delivery must be closed to protect the power interface from water or
dust ingress.
3.4.2. SIM Card Slot
X1
X2
DC
SIM
Figure 5. SIM card slot
To remove the SIM card drawer, untighten the two knurled screws until they are loose and
not anymore connected to the unit frame. Carefully move the drawer out of the frame.
Place the SIM cards into the sockets in slot 1 and/or slot 2 with the contacts facing down.
Let chamfered corners align according markings on the drawer.
Put the SIM card drawer back into the unit, ensuring that it fits into place and tighten the
knurled screws on both sides until the drawer is fully inserted and plane with the unit
frame.
NOTICE
To use the device in its specified temperature range it is important to use
a robust industrial SIM card with extended temperature range.
NOTICE
In order to guarantee proper IP against dust and water, please check
carefully that the drawer is fully inserted and screws are properly
tightened.
16
Ibex-RT-330 Series
