Ethernet TX
Connector
M12 X-coded female
Electrical specification
IEEE std 802.3
Data rate
10 Mbit/s, 100 Mbit/s, 1000 Mbit/s, manual or auto
Duplex
Full or half, manual or auto
Transmission range
Up to 100 m with CAT5e cable or better
Cabling
Shielded cable CAT5e or better is recommended
Conductive chassis
Yes
NOTE
The product is to be connected to internal Ethernet networks without
exiting a facility and being subjected to TNVs.
NOTICE
To avoid damages on the Ethernet interfaces, ensure that the far end side
of the Ethernet cable shield itself is connected to protective earth.
Antenna WLAN (A1, A2, A3)
Connector
QMA female
Direction
Transmit and receive
Cabling
50 Ohm coaxial cable and WLAN antenna required
Conductive chassis
Yes
WLAN interface
High power 3x3 MIMO 802.11n Access Point/Client
WLAN frequency bands
2.400 to 2.4835 GHz, 4.940 to 4.990 GHz, 5.150 to 5.350 GHz, 5.470 to
5.725 GHz, 5.725 to 5.850 GHz
Transmitting power
Ibex-RT-310
Max. conducted combined transmit power within the whole frequency
range:
802.11b/g/n, up to +18 dBm for all data rates
802.11a/n, up to +18 dBm for all data rates
Transmitting power
Ibex-RT-320
Max. conducted combined transmit power within the whole frequency
range:
802.11b/g/n, up to +27 dBm for all data rates
802.11a/n, up to +27 dBm for all data rates
NOTICE
Depending on the installation country there are frequency/band
restrictions and output power limitations.
24
Ibex-RT-310 and -320 Series
