4. Installation
4.1. Mounting
This product should be mounted on a 35 mm DIN-rail, which is horizontally mounted
inside an apparatus cabinet or similar. The DIN-rail must be connected to ground.
1. To mount the product, first push the support pin down, then towards the front of the
product to lock the support pin.
2. Then, place the product on to the DIN-rail. First the upper part, then the lower part
of the product.
3. Lastly, push the support pin forward to lock the product to the DIN-rail. Make sure
the products is secured to the DIN-rail.
Figure 7. Mounting of product
4.2. Removal of Product
To remove the product either push the support pin down and towards the front of the
product, or press down the support at the back with a screwdriver, and lift off the product
from the DIN-rail.
Lynx 5500 Series
17
