Ethernet TX
Connector
M12 X-coded female
Electrical specification
IEEE std 802.3
Data rate
10 Mbit/s, 100 Mbit/s, 1000 Mbit/s, manual or auto
Duplex
Full or half, manual or auto
Transmission range
Up to 100 m with CAT5e cable or better
Cabling
Shielded cable CAT5e or better is recommended
Conductive chassis
Yes
NOTE
The product is to be connected to internal Ethernet networks without
exiting a facility and being subjected to TNVs.
NOTICE
To avoid damages on the Ethernet interfaces, ensure that the far end side
of the Ethernet cable shield itself is connected to protective earth.
Antenna WLAN (A1 to A4)
Connector
N female
Direction
Transmit (A1 and A2) and receive (A1 to A3)
Cabling
50 Ohm coaxial cable and WLAN antenna required
Conductive chassis
Yes
WLAN interface
2x2 MIMO 802.11n Access Point (A1 and A2)
1x802.11abgn Monitoring (A3)
WLAN frequency bands
2.400 to 2.4835 GHz, 5.150 to 5.350 GHz, 5.470 to 5.725 GHz, 5.725 to
5.850 GHz
Transmitting power (A1 and
A3)
Max. conducted transmit power per port within the whole frequency
range:
up to +22 dBm
NOTICE
Depending on the installation country there are frequency/band
restrictions and output power limitations.
Ibex-RT-370 Series
25
