2.5.1. Agency Approvals and Standards Compliance
Approvals and Standards
Climate
• EN 50155, class OT4 Railway applications - Electronic equipment used on
rolling stock
• EN 50125-3, Railway applications – Environmental conditions for equipment,
Part 3: Equipment for signalling and telecommunications
EMC
• EN 50155, Railway applications - Electronic equipment used on rolling stock
• EBA EMV 06, German Federal Railway Authority, Radio compatibility of rail
vehicles (valid for LV models only)
• EN 50121-3-2, Railway applications – Electromagnetic compatibility, Part 3-2:
Rolling stock – Apparatus
• EN 50121-4, Railway applications - Electromagnetic compatibility. Part 4:
Emission and immunity of the signalling and telecommunications apparatus
• ETSI EN 301 489-1, Electromagnetic compatibility (EMC) and Radio
spectrum Matters (ERM) for radio equipment and services - Part 1: Common
technical requirements
• ETSI EN 301 489-17, Electromagnetic compatibility (EMC) and Radio
spectrum Matters (ERM) for radio equipment - Part 17: Specific conditions
for Broadband Data Transmission Systems
• ECE E-Mark, Road Vehicles, E13 10R-06 15771 (valid for LV models only)
Mechanical
(Shock and vibration)
• EN 61373, category 1, class A and B
• EN 50125-3, Outside the track
Insulation
(Coordination and test)
• EN 50124-1, Railway applications – Insulation coordination
• EN 50155, Railway applications - Electronic equipment used on rolling stock
Radio communication
• ETSI EN 300 328, Wideband transmission systems; Data transmission
equipment operating in the 2,4 GHz ISM band and using wide band
modulation techniques
• ETSI EN 301 893, 5 GHz RLAN
• IEEE 802.11, Wireless LAN Medium Access Control (MAC) and Physical
Layer (PHY) Specifications
• FCC-47-15, Radio frequency devices
Safety
• EN/IEC 62368-1, Safety Requirements for audio/video, information and
communication technology equipment
• EN 45545-2, Fire protection on railway vehicles
• NFPA 130, Fire protection for fixed guideway transit and passenger rail
system
2.5.2. United States - FCC
The enclosed product complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (i.) this product may not cause harmful interference and (ii.) this
product must accept any interference received, including interference that may cause
undesired operation.
To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation
distance of 20 cm or more should be maintained between the antenna of this product and
8
Ibex-RT-220 Series
