NOTE
: If mains voltage fails or you switch the MONACO off by mistake during the auto
bias procedure, it will for safety reasons continue after mains is switched on again until the
procedure is fully completed. During this time, you the amp cannot be operated.
When the bias setting is completed you may turn on the amplifier and listen to music.
3.2.2 Main illumination
brightness
(upper
LEDs
)
Press and hold the button
Setup
and press either
DIM Main
(left) or
DIM Main
(right) to
increase or decrease the upper main lighting
Button combination for decreasing main LED lighting:
Button combination for increasing main LED lighting:
3.2.3 Dimming front LEDs
Press and hold the button
Setup
and press either
DIM Front
(left) or
DIM Front
(right) to
increase or decrease the LED brightness on the front panel
