2.2 Selecting the signal source
Use the input selector to select a signal source. The selected source is indicated by LED.
2.3 Volume setting
Use the volume knob to set the desired volume. The volume increases / decreases in 0.5
dB steps
while knob is turned slowly and more coarse while knob is turned faster.
The same principle is valid for remote control: Short presses onto the volume keys will
change volume by 0.5 dB steps, If you press for a longer time, volume will change faster.
3 Remote control
3.1 Layout
The remote control has ten buttons in total – the assignment is as follows:
Top row:
Left: Off/Standby/Tube adjust
Right: On/Operation
Second row:
Left: Setup Menu
Right: Mute