Westell Technologies Router 2400 User Manual Download Page 93

Page: 93 / 114

030-300331 Rev. A

October 2002

4-Port Router (Model 2400)

User Guide

VPI/VCI

Displays the VPI/VCI values obtained from your Internet Service Provider.

In Errors

The number of error packets received on the ATM port.

In Discard Packets

The number of discarded packets received.

In Non Unicast Packets

The number of non-Unicast packets received on the ATM port.

In Unicast Packets

The number of Unicast packets received on the ATM port.

In Octets

The number of bytes received on the ATM port.

Out Errors

The number of outbound packets that could not be transmitted due to errors.

Out Discard Packets

The number of outbound packets discarded.

Out Non Unicast Packets

The number of non-Unicast packets transmitted on the ATM port.

Out Unicast Packets

The number of Unicast packets transmitted on the ATM port.

Out Octets

The number of bytes transmitted on the ATM port.

MTU

Maximum Transmission Unit -The number of data bytes contained in the ATM frame.

Interface Type

A unique identifier that represents the interface type.

Interface Description

A description field that refers to the interface type.

Ethernet Port Statistics

The following settings will be displayed if you select

Ethernet Port Stats

from the

Troubleshooting

menu.

In Errors

The number of error packets received on the Ethernet interface.

In Discard Packets

The number of discarded packets received.

In Non Unicast Packets

The number of non-Unicast packets received on the Ethernet interface.

In Unicast Packets

The number of Unicast packets received on the Ethernet interface.

In Octets

The number of bytes received on the Ethernet interface.

Out Errors

The number of outbound packets that could not be transmitted due to errors.

Out Discard Packets

The number of outbound packets discarded.

Out Non Unicast Packets

The number of non-Unicast packets transmitted on the Ethernet interface.

Out Unicast Packets

The number of Unicast packets transmitted on the Ethernet interface.

Out Octets

The number of bytes transmitted on the Ethernet interface.

MTU

Maximum Transmission Unit- The number of data bytes contained in the Ethernet frame.

Interface Type

A unique identifier that represents the interface type.

Interface Description

A description field that refers to the interface type.

Summary of Contents for Router 2400


















































































































Search results

Summary of Contents for Router 2400

Reviews:

Related manuals for Router 2400

Brands by name

Popular brands

Westell Technologies Router 2400, User Manual

Search results

Summary of Contents for Router 2400

Reviews:

Related manuals for Router 2400

Brands by name

Popular brands