030-300331 Rev. A
56
October 2002
4-Port Router (Model 2400)
User Guide
NOTE: DHCP Lease Time is displayed in the following format: (dd:hh:mm:ss)*. This value must be greater than 10
seconds. The default = 01:00:00:00. Seconds must be between 0 and 59, minutes must be between 0 and 59, and
hours must be between 0 and 23.
*(dd = days, hh = hours, mm = minutes, ss = seconds).
If the settings you have entered in the
Public LAN Configuration
screen are incorrect, the following warnings
messages may be displayed via pop-up screens. If this occurs, check settings in the
Public LAN Configuration
screen.
Warning Message
Check Public LAN DHCP Settings
Start Address is not part of the Subnet
Check the value in the DHCP Start Address field
End Address is not part of the Subnet
Check the value in the DHCP End Address field
End Address is below the Start Address
Check the value in the DHCP End Address field
Lease time must be greater than 10 seconds
Check the values in the DHCP Lease Time fields
Seconds must be between 0 and 53
Check the
Seconds
field at DHCP Lease Time
Minutes must be between 0 and 59
Check the
Minutes
field at DHCP Lease Time
Hours must be between 0 and 23
Check the
Hours
field at DHCP Lease Time
If you clicked on
OK,
the following pop-up screen will be displayed. Click on
OK.
This will allow the modem to be
reset and the new configuration will take affect.
