PS71090
E
Product Manual
October 2019, Rev A
WESTELL.COM
©2019 Westell
Technologies
September 2019;
Doc No. CS14702802UM
rD
1.877.844.4274
Page 32 of 61
Figure 5-2A: Ethernet Cable
Figure 5-2B: Ethernet Connectors
5.7
Connecting to the Alarm Relay Panel
Use the provided Alarm Relay Serial Cable to connect the PS71090E Public Safety Signal Booster to
the alarm relay panel. If the provided cable is not long enough for your system, you will need to build
one.
1.
Strip the outer serial cable insulation back to expose the inner conductors,
Figure 5-3.
2.
Strip back the insulation on the ends of each conductor. (Tin wires as needed.)
