PS71090 Product Manual
March 2017, Rev G
WESTELL.COM
©2017 Westell Technologies
March 2017; Doc No. CS14702802UM rG
1.877.844.4274
Page 34 of 50
6 System Operation
6.1
Operating the Program
Access the PS71090 Public Safety Signal Booster using the provided PS71090 PS-SMR 700/800
software through a LAN connection. The Signal Booster ships with the IP address 192.168.10.150 on
the GUI port.
To connect directly to the Signal Booster from a laptop or PC with a crossover CAT-5E cable or over a
LAN, change the TCP/IP settings on your computer to enable a connection to a host that has a static
IP.
Open Control Panel\All Control Panel Items\Network Connections
Choose appropriate Local area connection:
Figure 6.1: Network Connection Set-up
1)
Select Use the following IP Address and enter the IP address 192.168.10.x, where
‘
x
’
is any number from 2 to 254, inclusive, other than 150.
e.g. Set Computer IP to 192.168.10.2
2)
Ensure that the subnet mask is set to 255.255.255.0.
NOTE
Refer questions about these settings to your IT department.
