PS71090-P8 Product Manual
March 2018, Rev A
WESTELL.COM
©2017 Westell Technologies
March 2018; Doc No. CS14000802UM rA
1.877.844.4274
Page 39 of 52
Item #
Section
800MHz Band
Allows sub-band 3 to be set to Select
Item #
Section
4
Downlink
Gain [dB]
Displays downlink gain
Output (dBm)
Displays Output value
AGC Level [dBm]
Displays Automatic Gain Control Level
HPA
Displays Downlink HPA On/Off
Item #
Section
5
Uplink
Gain (dB)
Displays status of the uplink gain
UL Output [dBm]
Displays uplink output level
ALC Level [dBm]
Displays Automatic Gain Control Level
HPA
Displays Uplink HPA On/Off
Item #
Section
6
Isolation
Isolation Value
When power is on, an isolation check is
performed and the values are displayed
Isolation
The isolation check can be performed with the
RF on or off
Note
: Neither the isolation check, nor recheck, will indicate a change in
power levels if the unit’s own power has been switched off.
Item #
Section
7
Alarm Status
Not User-Configurable/Informational Only
( GREEN = Normal; RED = Alarm )
PLL LD
Display alarm
