background image

198823 R11

23

Procedure for Obtaining Service

In the event of a warranty claim, the purchaser must complete any and all information required by
Westeel in order to properly assess or investigate the claim. Westeel will not be responsible for the
removal of any of the goods found to be defective, or transportation charges to and from Westeel's
authorized dealer or distributor, or for installation of any replacement goods and/or parts furnished
under the warranty.

Limitations as to Scope of Warranty

The warranty does not extend to defects or damage caused, in whole or in part, by:

1. use of a kind and/or to a degree not reasonably expected to be made of the goods;

2. improper storage of the goods both prior to and after purchase;

3. damage caused by, or in the course of, installation or assembly;

4. any use of the goods which is not an intended use as specified in Westeel's published product

literature, or otherwise specified by Westeel in writing;

5. any equipment attached to or used in conjunction with the goods;

6. any field modifications or substitutions to original bin components;

7. inadequate ventilation or any other circumstance not in keeping with proper maintenance and/or

use of the goods;

8. Acts of God, accident, neglect or abuse of the goods by the purchaser and/or any other individual

or entity; or

9. Any use or installation inconsistent with Westeel’s Standard Disclaimers.

Limitations as to Manufacturer

The warranty does not cover products sold by Westeel that are not manufactured by Westeel. In those
circumstances, the purchaser is referred to the manufacturer of those products.

Limitation of Implied Warranties and Other Remedies

To the extent allowed by law, neither Westeel nor its dealers, nor any company affiliated with Westeel
makes any warranties, representations, or promises as to the quality, performance, or freedom from
defect of any Product covered by this Warranty.

WESTEEL HEREBY DISCLAIMS, TO THE EXTENT APPLICABLE, ANY AND ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. A PURCHASER’S ONLY REMEDIES IN
CONNECTION WITH THIS WARRANTY ARE THOSE SET FORTH IN THIS WARRANTY. IN NO EVENT WILL
WESTEEL, ITS DEALERS, OR ANY COMPANY AFFILIATED WITH WESTEEL BE LIABLE FOR INCIDENTIAL,
CONSEQUENTIAL OR PUNITIVE DAMAGES.

Some jurisdictions do not allow waivers of certain warranties, so the above waivers may not apply to
you. In that event, any implied warranties are limited in duration to ninety (90) days from delivery of
the products. You may also have other rights which vary from jurisdiction to jurisdiction.

Exclusive Warranty

This warranty is the only warranty provided by Westeel and all other warranties and/or commitments,
whether express or implied and no matter by whom made, statutory or otherwise, are subsumed and
replaced by it and are of no legal effect. If any provision of the warranty is held by a court of

SEALFORM CONCRETE FORM – GRAIN BIN

8. LIMITED WARRANTY:

WESTEEL GRAIN BIN

PRODUCTS

Summary of Contents for Sealform Concrete Form



























Reviews: