manualshive.com logo in svg

Westeel Grain Bin Extension Tier 14 Series, Installation And Storage Instructions

Share
Download
Westeel Grain Bin Extension Tier 14 Series Installation And Storage Instructions Download Page 9

198854 R16

9

To prevent serious 

injury or death:

• Do not climb ladder if 

damaged, wet, icy, 

greasy, or slippery.

•  Maintain good 

balance by having at 

least three points of 

contact at all times.

FALLING HAZARD

WARNING

Part Number: 8110–00136

When equipped with aeration system, to 

prevent roof and/or bin damage:

• Use a minimum 1 square foot (0.1m

2

) opening 

for each 1000ft

3

/min (30m

3

/min) of air.

• Ensure all roof vents are open and unobstructed.
• Discontinue use of aeration fan if roof vents 

become obstructed with ice.

NOTICE

Part Number: 8110–00066

FALL RESTRAINT

ANCHOR POINT

MAX WORKING LOAD:

1,000 lb [453 kg]

SEE MANUFACTURER ROOF MANUAL FOR 

DETAILED INSTRUCTIONS REGARDING 

ANCHOR POINT LOCATIONS

Part Number: 8110–01090

SERIES 14 & 19 – GRAIN BIN EXTENSION TIER

2. SAFETY

Summary of Contents for Grain Bin Extension Tier 14 Series































Reviews:

No comments

Brands by name

Popular brands

Load more brands