22
Charging and Discharging Parameters Setting Interface
In the main menu interface, when press or , the inverse cursor
moves between interfaces of main menu 1 and main menu 2. when the inverse cursor
rests on
3
．
Parameter Set
in main menu 1, press
to enter into charging and
discharging parameters setting interface whose displaying interface as follows. When
press
, it moves back to the previous interface and the inverse cursor rests on
the position of the first parameter.
﹡
Control voltage setting please in strict accordance with Over Volt. Disc
＞
Charg Lmt
＞
Equal
＞
Boost
＞
Float
＞
Boost V. Rect or Under V. Rect
＞
Under V. Warn
＞
Low V. Disc
＞
Discharg Lmt , Please refer to chapter 6 control voltage table while
setting.
▼
Temperature compensation coefficient
Press
or
, then the inverse cursor moves among every
parameters. When
is continuously pressed, the inverse cursor returns to the
main menu. Press
or
to modify temperature compensation
coefficient.
↑/ +
↓/ -
ENTER/→
MENU/←
Parameter Set
Temp
Compensate
Coeff
-
0
5.0mV /
℃
/ 2V
↑/ +
↓/ -
MENU/←
ENTER/→
MENU/←
