
Figure 6-1: Preoperation Check List
Door latch operates freely, rotary opens with doors and closes securely.
Shift handle operates freely, is securely mounted, and all cotter keys are in place. Handle
Stays in selected position.
Throttle handle operates freely, is securely mounted, and all cotter keys are in place. Handle
moves to neutral position when released.
Gear box oil is up to level of upper magnetic plug hole.
Gears and rotary are fully lubricated with grease.
Mounting clevis is secure and tong is leveled. All hanging hardware is securely fastened.
All bolts and nuts are tight.
Fluid power source has been connected, and fluid has circulated for 2 minutes.
With shift lever in low gear position (no load) and reversing pin in "make" position, throttle
has been advanced slowly (make up) until fully opened for a check of unusual noises.
Section 6 Page 2
Summary of Contents for 16-25
