Install Prep
Page 5
Remotely accessing the device via FlexDM.net
The Web UI of your
FlexStream device can also
be accessed remotely using
the FlexDM remote
management system. Using
a web browser, navigate to
. If you
don’t already have an
account, click on the “Sign
Up” link to create a new
account. Once your email
address has been validated,
you can log into the system.
To add your device, you will
need the device ID and a
“nonce” code. These are both
available from the MX- web UI.
Use your browser to access the
MX via the IP address as shown
above. Navigate to
System>Settings. The
information is outlined in
RED
in the image to the right. If you
do not see three green checks
as shown to in the FlexDM
Section of the image to the
right, check with your network
administrator to see if the
device is being blocked in the
firewall.
