West Mountain Radio PWRguard PLUS Operating Manual Download Page 9

9

West Mountain Radio

Operating Manual

FCC INFORMATION

For a Class B digital device or peripheral, the user instructions shall include the 

followling or similar statement, placed in a prominent location in the text of the 

manual:

Note: This equipment has been tested and found to comply with the limits for 

a class B digital device, pursuant to part 15 of the FCC Rules. These limits 

are designed to provide reasonable protection again harmful interference in a 

residential installation. This equipment generates,uses and can radiate radio 

frequency energy, and if not installed and used in accordance with the guaran-

tee that interference will not occur in a particular installation. If this equipment 

does cause harmful interference to radio or television reception, which can be 

determined by turning the equipment off and on, the user is encouraged to try to 

correct the interference by one or more of the following measures: 

 

•Reorient or relocate the receiving antenna

 

•Increase the separation between the equipment and receiver        

 

•Connect the equipment into an outlet on a circuit different  

 

    

  from that to which the receiver is connected.

 

•Consult the dealer or an experienced radio/TV technician for     

 

  help.

Modifications not expressly approved by the manufacturer could void the user’s 

authority to operated equipment under the FCC Rules

.

PWRguard Plus Warranty

PWRguard Plus

 is warranted against failure due to defects in workmanship or materials for 

one year after the date of purchase from West Mountain Radio. Warranty does not cover 

damage caused by abuse, accident, misuse, improper or abnormal usage, failure to follow 

instructions, improper installation, alteration, lightning, or other incidence of excessive 

voltage or current. If failure occurs within this period, return the 

PWRguard Plus

 or accessory 

to West Mountain Radio at your shipping expense. The device or accessory will be repaired 

or replaced, at our option, without charge, and returned to you at our shipping expense. 

Repaired or replaced items are warranted for the remainder of the original warranty period. 

You will be charged for repair or replacement of the 

PWRguard Plus

 or accessory made after 

the expiration of the warranty period.

West Mountain Radio shall have no liability or responsibility to customer or any other person 

or entity with respect to any liability, loss, or damage caused directly or indirectly by use 

or performance of the products or arising out of any breach of this warranty, including, 

but not limited to, any damages resulting from inconvenience, loss of time, data, property, 

revenue, or profit, or any indirect, special incidental, or consequential damages, even if 

West Mountain Radio has been advised of such damages.

Except as provided herein, West Mountain Radio makes no express warranties and any 

implied warranties, including fitness for a particular purpose, are limited in duration to the 

stated duration provided herein.

                                                    www.westmountainradio.com

                                                         1020 Spring City Drive, Waukesha, WI 53186      

                                                   tel 262-522-6503 fax 262-522-6504

Summary of Contents for PWRguard PLUS











Reviews: