17
HA
HAIL VOLUME
¡¡¡¡¡¡¡¡¡
Adjusting the Hail Volume
While you are in Hail mode, you can adjust the outgoing volume by
pressing
+
/
-
on the microphone, or by rotating the
PUSH – SEL
knob
on the
VHF600
. The incoming volume is adjusted by using the
PWR/VOLUME
knob.
Hail
To access the Hail mode, press
HAIL
on the base.
HA
appears on the
display. Press and hold the PTT switch on the microphone, hold the
microphone approximately two inches away from your mouth, and speak
clearly in a normal voice. To cancel Hail mode, press
HAIL
on the base
again.
Note:
If you purchase an optional hailer horn for the radio, make sure
it meets these specifications.
•
17 Watts (nominal)
•
10 Watts (minimum)
•
4
Ω
load (impedance)
* RE-ENTRANT feature might not work on all models.
VHF600_UT921ZH 5/28/04 4:24 PM Page 17
