16
To cancel the channel in memory, press and hold
SCAN/MEM
for 2
seconds. The
MEM
icon disappears.
Note:
The Memory channel can be set independently in 3 regional
modes (USA, INT, and CAN). You cannot use this feature in
WX mode or for channel 70.
Memory Channel Scan
This feature will allow you to scan only the channels of your choice.
Memory Channel Scan can only be activated if channels have previously
been placed into memory.
To turn on Memory Channel Scan, press
SCAN/MEM
. The
VHF600
scans the channels that were previously placed into memory, from the
lowest channel number to the highest channel number.
Triple Watch Alert Scan
This feature will allow you to listen to the channel of your choice. scan
channels 16 and 9 every 2 seconds, and scan for Emergency or
Weather Alerts every 7 seconds to be sure that you will not miss any
important broadcasts.
To turn Triple Watch Alert Scan on, press and hold
WX/ALERT
for
2 seconds while in Memory Channel Scan mode. While the Memory
Channels are scanned, Channel 16 and Channel 9 are scanned every 2
seconds, and the Weather Channel is scanned every 7 seconds. "
TRI
"
and "
ALT
" appear on the display.
Alert Scan
This feature will allow you to scan the channels of your choice and also
scan the Weather channels for Emergency or Weather alerts.
To turn Alert Scan On, press and hold
WX/ALERT
for 2 seconds. While
the memory channels are scanned, the Weather Channel is scanned
every 7 seconds. The icon appears on the display.
VHF600_UT921ZH 5/28/04 4:24 PM Page 16
