Wessel-Werk EBK 340, Operating Manual

Page: 5 / 12

Cleaning
It may happen that your agitator brush becomes blocked or less
effective. This may be caused by excessive hairs and threads
wrapped around the brush roller.

Always unplug the nozzle from the power supply first.

Cleaning the brush roller

Insert the points of a pair of scissors into the brush roller slot
(see illistration page 7). Move the scissors to catch the
threads and hairs in the scissors.

Cut the threads of hairs and remove them manually or using
a small sized pair of pliers.

Should your nozzle cease to pick-up debris:
This can be caused by an obstruction in the intake and or neck
of the power nozzle. This can be caused when excessively
large or long debris, like paper or a sock, is lodged in the intake
and/or neck area of the nozzle.

Always unplug the nozzle from the power supply first.

Clearing an Obstruction

Remove the wand from the nozzle by depressing the button
on the nozzle neck and pulling the nozzle and wand apart.

Look into the neck and remove any visable debris.

Look into the intake area of the nozzle and remove any
visable debris. (See Illustration Page 7)
5