Wessel-Werk EBK 340, Operating Manual

Page: 4 / 12

Operation

To achieve the best results when cleaning carpet, slowly pass
the power nozzle back and forth over the area to be cleaned.

To clean hard surfaces simply move the power nozzle over the
area to be cleaned with the vacuum on and the power nozzle
on or off.

It is best to avoid cleaning carpet fringes. When it is
unavoidable, place the power nozzle over the carpet and pull it
over the fringe onto the floor.
EBK 340

The green lamp indicates that the nozzle is on and operating
normally.

The red warning lamp will light if the brush rotation is restricted.
This can occur if an object causes brush speed reduction, thus
overloading the drive motor. If this occurs:

Turn off the vacuum cleaner and disconnect the power
supply cord.

Remove the object that is preventing the brush from
rotating.

Press the red reset button. (See illustration page 6)

Reconnect the nozzle. Return to cleaning.
EBK 341

The auto-shut off feature will activate should rotation of the
brushroll become restricted. If this occurs:

Turn off the vacuum cleaner and disconnect the power
supply cord.

Remove the object that is preventing the brush from
rotating.

Reconnect the nozzle. Return to cleaning.
4