Wessamat Cube-Line IC 130 EL, User Manual, Page: 87 / 134

Operationg manual - English
Operating-Manual-CubeLine-v.01 01/2021
87
6.2 System Control
Start/Stop the machine:
Press the ON button on the front once.
When the machine is switched on, the defrosting phase starts first for safety reasons.
When the machine is switched off, the tub automatically moves down for emptying.
Setting the type of ice cube (IC135 EC only):
By pressing the button on the Combi-Module, the type of ice cube can be selected which should be produced with
priority.
A blue LED indicates which type of ice cube is currently being produced. If the supply of the currently selected type
of ice cube is completely full, the rocker switches over automatically.
Manual production time correction:
The production time can be readjusted manually. To do this, press and hold button B on the control for 5 seconds.
The "Prd.Zeit Korrektur" window opens.
Example setting to -5 minutes of the production time:
Here the production time can be increased or decreased by up to 5 minutes by pressing the + or - button. The "
Prd.Zeit Korrektur " window can be exited again by pressing button B once.
Automatic production time correction:
The production time automatically adapts to the condensing temperature.
This enables an almost constant ice quality with fluctuating ambient temperatures. The automatic correction works
in an ambient temperature range of 10-30 ° C.
The time correction value is queried and set when switching from the pre-cooling phase to the freezing phase.
Hinweis:
The automatic production time correction is always ON, although the manual production time is set..
s
d