background image

USERÕS MANUAL

Part No. 151613 R0299A

Printed in Canada © 1999  ICON Health & Fitness, Inc.

Model No. WETL91072
Serial No. 

Write the serial number in the space
above for future reference.

CAUTION

Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.

Serial Number Decal

QUESTIONS?

As a manufacturer, we are 
committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satis-
faction through our Customer
Service Department. 

Please CALL:
0345-089009

Or WRITE:
ICON Fitness Lifestyle Ltd.
Greenwich House
223 North Street 
Sheepscar
Leeds LS7 2AA
West Yorkshire

Class H C

Fitness Product

ORDERING REPLACEMENT PARTS

To order replacement parts, contact the ICON Fitness Lifestyle Ltd. office, or write: 

ICON Fitness Lifestyle Ltd.
Greenwich House
223 North Street
Sheepscar
Leeds LS7 2AA
West Yorkshire

Tel: Country Code: 0345-089009
Fax: 0113-2411120

To help us assist you, please be prepared to give the following information:

¥  The NAME of the product (WESLO

¨

CADENCE 910 treadmill)

¥  The MODEL NUMBER of the product (WETL91072)

¥  The PART NUMBER of the part (see the EXPLODED DRAWING and PART LIST attached in the centre of this

manual)

¥  The DESCRIPTION of the part (see the EXPLODED DRAWING and PART LIST attached in the centre of this

manual).

Summary of Contents for WETL91072 Cadence 910












Reviews: