5
ASSEMBLY
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tools, assembly requires a Phillips screwdriver and two
adjustable wrenches .
Use the drawings below to identify the small parts used in assembly. The number in parentheses below
each drawing is the key number of the part, from the PART LIST near the end of this manual. The second num-
ber is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is
not in the hardware kit, check to see if it has been preassembled.
M10 Nylon
Locknut (65)–2
M8 Nylon
Locknut (10)–2
M8 Split
Washer (42)–3
M8 Washer
(54)–4
M6 Washer
(68)–4
M6 Nylon
Locknut (63)–4
M4 x 5mm
Self-tapping
Screw (66)–2
M4 x 8mm
Screw (29)–2
M6 x 35mm Button
Screw (61)–8
M10 x 75mm Carriage Bolt (30)–2
M10 x 60mm Button Screw (33)–2
M8 x 20mm Button
Screw (34)–3
M6 Curved
Washer (55)–8
M4 Washer
(67)–2
M6 x 15mm Button
Screw (46)–4
M6 x 30mm Button
Bolt (64)–4
M8 x 125mm Bolt (62)–2
Summary of Contents for PURSUIT R62
Page 17: ...17 NOTES ...