4
ASSEMBLY
Assembly requires two persons.
Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable spanner , Phillips screw-
driver , and pliers .
As you assemble the exercise cycle, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST on page 14. The number following the
parentheses is the quantity needed for assembly.
Note: Some small parts shown in the assembly steps may
be pre-assembled. If a part is not found in the parts bag, check to see if it is pre-assembled.
M8 x 75mm Carriage
Bolt (16)–4
M8 x 20mm
Button Screw (51)–4
M8 Nylon
Locknut (46)–3
M8 Washer
(53)–3
M8 Curved
Washer (44)–8
M8 Acorn
Nut (35)–4
M8 Spring
Washer (59)–8
1. While another person lifts the rear of the Frame (1),
attach the Rear Stabilizer (7) to the Frame with two
M8 x 75mm Carriage Bolts (16), two M8 Curved
Washers (44), two M8 Spring Washers (59), and two
M8 Acorn Nuts (35).
1
59
59
35
16
35
7
44
44
1
