background image

13

 3.  Measure your heart rate, if desired.

   If there are 

sheets of plastic 

on the metal 

contacts of the 

handgrip heart 

rate monitor, 

remove the 

plastic. Place 

your hands on 

the handgrip 

heart rate moni-

tor, with your 

palms on the contacts. Avoid moving your hands. 

When your pulse is detected, your heart rate will be 

shown when the pulse mode is displayed. 

For the 

most accurate heart rate reading, continue to 

hold the contacts for about 15 seconds. 

   If your heart rate is not shown, make sure that the 

pulse mode is displayed. In addition, make sure 

that your hands are positioned as described and 

that you are not moving your hands excessively or 

squeezing the contacts tightly. For optimal perfor-

mance, periodically clean the contacts using a soft 

cloth; 

never use alcohol, abrasives, or chemi-

cals to clean the contacts.

 4.   Reset the console, if desired.

   To reset the console, hold down the Reset button 

for a few seconds. After the console is reset, the 

scan mode will be selected.

5.   When you are finished exercising, the console 

will turn off automatically.

   If the pedals are not moved for a few seconds, the 

console will pause.

   The console has an auto-off feature. If the ped-

als are not moved and the console buttons are 

not pressed for a few minutes, the console  will 

turn off automatically to save the batteries.

Contacts

Summary of Contents for pursuit ct 3.3 WLEX81915.1

















Reviews: