background image

4

BEFORE YOU BEGIN

Thank you for selecting the new WESLO PURSUIT

®

795i exercise cycle. The PURSUIT 795i blends
advanced engineering with contemporary styling to
provide you with a low-impact workout in the conve-
nience and privacy of your own home.

For your benefit, read this manual carefully before
you use the PURSUIT 795i. 
If you have additional
questions, please call our Customer Service
Department at 0345-089009. To help us assist you,

please mention the product model number and serial
number when calling. The model number is
WLEX32480. The serial number can be found on a
decal attached to the PURSUIT 795i (see the front
cover of this manual for the location of the decal).

Before reading further, please look at the drawing
below and familiarise yourself with the parts that are
labelled.

HOW TO ADJUST THE BELT

The exercise cycle features a precision belt that must
be kept properly adjusted. If the belt causes exces-
sive noise or slips as you pedal, the belt should be
checked. To do
this, the left
side shield must
first be
removed. Refer
to the instruc-
tions on page
12 and remove
the left side
shield.
Next, use an
adjustable
wrench to turn the right pedal counterclockwise and
remove it. Remove the left side shield.
Press down on the centre of the Belt (16) between the
front and rear pulleys. There should be from 1/4” to
1” of vertical movement in the centre of the Belt.

If the Belt (16) is properly adjusted, reattach the side
shields and pedals. If the Belt needs to be adjusted,
loosen the M8 Washer Nut (37) on each side of the
Flywheel
Assembly (32).
To tighten the
Belt, turn the two
M6 Nuts (47)
clockwise; to
loosen the Belt,
turn the Nuts
counterclock-
wise. Make sure
that the Flywheel
is straight and
tighten the M8
Washer Nuts (37). Reattach the side shields and
pedals.

13

16

16

32

37

47

Water Bottle Holder
(bottle is not included)

Book Rack

Seat 

Seat Post 

Seat Knob

Pedal

BACK 

RIGHT SIDE

Front Wheels

FRONT

Resistance Knob

Console

Handlebars

Summary of Contents for PURSUIT 795I BIKE WLEX32480









Reviews: