Weslo PURSUIT 360R, User Manual

Page: 5 / 20

5
ASSEMBLY
To hire an authorized service technician to assemble the exercise cycle, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver , two adjustable
wrenches , and pliers .
Use the drawings below to identify the small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following
the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if
it has been preassembled.
M10 Locknut
(65)–2
M8 Locknut
(10)–2
M8 Split
Washer (42)–3
M8 Washer
(54)–4
M6 Washer
(68)–8
M6 Locknut
(63)–4
M4 x 5mm
Self-tapping
Screw (66)–2
M4 x 8mm
Screw (29)–2
M6 x 35mm Button
Screw (61)–8
M10 x 75mm Carriage Bolt (30)–2
M10 x 60mm Button Screw (33)–2
M8 x 20mm Button
Screw (34)–3
M6 Curved
Washer (69)–4
M4 Washer
(70)–2
M6 x 15mm Button
Screw (46)–4
M6 x 30mm Button
Bolt (64)–4
M8 x 125mm Bolt (62)–2