5
M10 Locknut
(65)–2
M8 Locknut
(10)–2
M8 Split
Washer (42)–3
M8 Washer
(54)–4
M6 Washer
(52)–8
M6 Locknut
(63)–4
M4 x 5mm
Self-tapping
Screw (66)–2
M4 x 8mm
Screw (29)–2
M6 x 35mm Button
Screw (61)–8
M10 x 75mm Carriage Bolt (30)–2
M10 x 60mm Patch Screw (33)–2
M8 x 20mm Patch
Screw (34)–3
M6 Curved
Washer (55)–4
M4 Washer
(67)–2
M6 x 15mm Button
Screw (46)–4
M6 x 30mm Button
Bolt (64)–4
M8 x 125mm Bolt (62)–2
ASSEMBLY
To hire an authorized service technician to assemble the exercise cycle, call 1-800-445-2480.
Assembly requires two persons.
Place all parts of the exercise cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver
and an
adjustable wrench
.
As you assemble the exercise cycle, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number
following the key number is the quantity needed for assembly.
Note: Some small parts may have been pre-
assembled. If a part is not in the hardware kit, check to see if it has been preassembled.
