10
11
Strap
24
Tab
11. Identify the Left Pedal (24), which is marked
with a “Left” sticker.
Firmly tighten the Left Pedal (24)
counterclock-
wise
into the left arm of the Crank (31).
Tighten the Right Pedal (not shown)
clockwise
into the right arm of the Crank (not shown).
Adjust the strap on the Left Pedal (24) to the
desired position, and press the end of the strap
onto the tab on the Left Pedal.
Adjust the
strap on the Right Pedal (not shown) in the
same way.
12.
Make sure that all parts are properly tightened before you use the exercise bike.
Note: Some hardware
may be left over after assembly is completed. Place a mat beneath the exercise bike to protect the floor.
13
36
10
10. While a second person holds the Upright (13)
near the Frame (1), connect the Upper Wire
(36) to the Lower Wire (8).
Tip: Avoid pinching the wires.
Slide the
Upright (13) onto the Frame (1).
Attach the Upright (13) with three M8 x 25mm
Button Screws (33) and three M8 Split Washers
(59).
8
33
33
33
59
59
59
1
Avoid pinching
the wires
31
