16
ATTACHING AND REMOVING THE SEAT
Set the bracket on the Seat Frame (36) onto the pin
on the Front Upright (42). Attach the Seat Frame to
the Front Upright with the M8 x 67mm Carriage Bolt
(14) and the Seat Knob (40).
For some exercises, the Seat (13) must be removed.
First, make sure that the chain is not attached to the
leg lever. Next, remove the Seat Knob (40) and the
M8 x 67mm Carriage Bolt (14) from the Seat Frame
(36). Lift the Seat Frame off the Front Upright (42).
ATTACHING THE LEG LEVER TO THE LOW
PULLEY STATION
To use the Leg Lever (29), the seat must be attached
to the front upright (see ATTACHING AND REMOV-
ING THE SEAT above).
Attach one end of the Chain (52) to the M10 x 63mm
Eyebolt (35) with a Cable Clip (53). Attach the other
end of the Chain to the Short Cable (23) with a Cable
Clip.
Note: Make sure the Eyebolt is positioned
vertically on the Leg Lever.
40
36
42
13
Pin
52
53
23
29
35
14
Summary of Contents for Gym 1000
Page 20: ...20 NOTES ...
Page 21: ...21 NOTES ...
Page 26: ... V Pulley 6 Not shown to scale 90mm Pulley 15 Not shown to scale ...
