8
10
59
5
10. Insert the Left Upper Body Arm (4) into the Left Upper
Body Leg (6) and attach it with two M8 x 45mm Button
Bolts (11) and two M8 Nylon Locknuts (59).
Make sure
that the Nylon Locknuts are in the hexagonal holes
in the Left Upper Body Leg.
Repeat this step for the Right Upper Body Arm (5)
and the Right Upper Body Leg (7).
8
7
11
6
Hexagonal
Holes
4
9
10
2
18
Wire Harness
Avoid pinching
the wire
harnesses
87
17
66
9. While another person holds the Console (10) near the
Upright (2), connect the Upper Wire Harness (18) to
the wire harness on the Console.
Attach the Console (10) to the Upright (2) with four
M6 x 18mm Patch Screws (87).
Be careful not to
pinch the wire harnesses.
Attach the Water Bottle Holder (17) to the Upright (2)
with two M4 x 22mm Screws (66).
11.
Make sure that all parts of the elliptical exerciser are properly tightened.
Place a mat under the elliptical
exerciser to protect the floor or carpet from damage.
8. The Console (10) requires four “AA” batteries (not
included); alkaline batteries are recommended.
Remove the battery cover from the Console and
insert four batteries into the Console.
Make sure that
the batteries are oriented as shown by the dia-
gram inside the battery compartment.
Then, reat-
tach the battery cover.
10
Batteries
Battery
Cover
