11
9. Attach the Right Handrail (94) to the Console
(109) with an M5 x 16mm Screw (13), an M5
Star Washer (12), and two M4.2 x 19mm
Screws (10).
Make sure that no wires are
pinched. Start all three Screws before tight-
ening any of them. Tighten the M5 x 16mm
Screw and then tighten the M4.2 x 19mm
Screws. Do not overtighten the Screws.
Attach the Left Handrail (92) to the other side
of the Console (109) in the same way.
Note:
There are no wires on the left side of the
Console.
Remove the plastic ties from the Right Handrail
(94) and the Left Handrail (92). If necessary,
press the M8 Cage Nuts (41) into place.
9
13
13
10
109
94
92
12
12
10
10
10
97
10
10. Have a second person hold the Console (109)
near the Right Upright (98) and the Left Upright
(not shown).
Connect the Upright Wire (97) to the console
wire.
See the inset drawing. The connectors
should slide together easily and snap into
place.
If they do not, turn one connector and try
again.
IF THE CONNECTORS ARE NOT CON-
NECTED PROPERLY, THE CONSOLE MAY
BE DAMAGED WHEN THE POWER IS
TURNED ON.
Insert the connectors and excess
wire into the Right Upright (98).
Remove the wire tie from the Upright Wire (97).
Next, set the Console (109) onto the top of the
Right Upright (98) and the Left Upright (not
shown).
Make sure that no wires are pinched.
98
97
Console
Wire
109
41
41
Wire
Tie
Console
Wire
