background image

Part No. 236099 R0306A

Printed in China © 2006 ICON IP, Inc.

ORDERING REPLACEMENT PARTS

To order replacement parts, call our Customer Service Department toll-free at 800-830-7240, or call:

When ordering parts, please be prepared to provide the following information:

• the MODEL NUMBER of the product (WATL16105.0)
• the NAME of the product (WESLO A-40 treadmill)
• the SERIAL NUMBER of the product (see the front cover of this manual)
• the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and EXPLODED DRAWING 

attached in the center of this manual)

LIMITED WARRANTY

Goodfamily, Inc. (Goodfamily), warrants this product to be free from defects in workmanship and mater-
ial, under normal use and service conditions, for a period of ninety (90) days from the date of purchase.

This warranty extends only to the original purchaser. Goodfamily's obligation under this warranty is lim-
ited to replacing or repairing, at Goodfamily's option, the product through one of its authorized service
centers. All repairs for which warranty claims are made must be pre-authorized by Goodfamily. This war-
ranty does not extend to any product or damage to a product caused by or attributable to freight dam-
age, abuse, misuse, improper or abnormal usage or repairs not provided by a Goodfamily authorized
service center; products used for commercial or rental purposes; or products used as store display mod-
els. No other warranty beyond that specifically set forth above is authorized by Goodfamily.

Goodfamily is not responsible or liable for indirect, special or consequential damages arising out of or in
connection with the use or performance of the product or damages with respect to any economic loss,
loss of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or
other consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation
of incidental or consequential damages. Accordingly, the above limitation may not apply to you.

The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the
above limitation may not apply to you.

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

Goodfamily, Inc.

Beijing:

010-60291670

Guizhou:

0851-5617855

Shengang:

024-22507779

Changchun: 0431-682499

Ha’erbin:

0451-82702754

Shenzhen:

0755-83248325

Changsha: 0731-4825618

Hefei:

0551-4238040

Shijiazhuang: 0311-86219246

Chengdu:

028-86927825

Jinan:

0531-86292209

Wuhan:

027-87275455

Chongqing: 023-65457730

Kunming:

0871-3130512

Xi’an:

029-87891305

Dongquan: 0769-2333575

Nanjing:

025-85640306

Xinjiang:

0991-8813186

Fuzhou:

0591-87734032

Nanning:

0711-5331007

Guangzhou: 020-37652666

Shanghai:

021-28323250/28323233

Summary of Contents for Cadence A 40 Treadmill




















Reviews: