2. Have a second person hold the Base (71) in the position
shown.
Identify the Right Handrail (6) which has a large hole
near the lower end.
Hold the Right Handrail (6) so that the bend is in the
position shown. Insert two Handrail Bolts (12) into
the bracket on the Right Handrail.
Attach the Right
Handrail to the Base (71) with the Handrail Bolts, two
Handrail Washers (30), and two Nuts (17).
Do not
tighten the Nuts yet.
Attach the Left Handrail (7) to the Base (71) in the
same way.
2
6
7
71
17
12
17
30
30
30
12
Large
Hole
Bend
4. Have a second person lift and hold the front end of the
Frame (55). Hold a Frame Spacer (13) between the Right
Handrail (6) and the Frame. Attach the Right Handrail to
the Frame with a Frame Bolt (10), a Handrail Washer
(30), and a Handrail Star Washer (60).
Repeat this step on the left side of the treadmill.
13
55
60
10
30
6
3. With the help of a second person, raise the Handrails
(6, 7) so the Base (71) is flat on the floor as shown.
Attach the Wheels (15) to the outer sides of the Base
(71) with two Wheel Bolts (14) and two Wheel Nuts (83)
as shown.
Do not overtighten the Wheel Nuts; the
Wheels should turn freely.
Position the front of the treadmill Frame (55) between the
Handrails (6, 7) as shown. Next, locate the long wire tie
inside of the lower end of the Right Handrail (see the
inset drawing). Tie the end of the wire tie securely to the
end of the Wire Harness (22). Then, use the opposite
end of the wire tie to pull the Wire Harness through the
Right Handrail until the Wire Harness extends from the
upper end of the Right Handrail.
71
83
15
14
6
55
3
22
Wire
Tie
Wire
Tie
4
7
7
22
6
All manuals and user guides at all-guides.com
