background image

Part No. 301935 R1013A 

Printed in China © 2013 ICON IP, Inc.

To order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to pro-

vide the following information when contacting us:

•  the model number and the serial number of the product (see the front cover of this manual)

•  the name of the product (see the front cover of this manual)

 

•   the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED 

   DRAWING near the end of this manual)

This electronic product must not be disposed of in municipal waste. To pre-

serve the environment, this product must be recycled after its useful life as 

required by law. 

Please use recycling facilities that are authorized to collect this type of waste in 

your area. In doing so, you will help to conserve natural resources and improve 

European standards of environmental protection. If you require more information 

about safe and correct disposal methods, please contact your local city office or 

the establishment where you purchased this product.

ORDERING REPLACEMENT PARTS

RECYCLING INFORMATION

Summary of Contents for CADENCE 26.0





























Reviews: