WESAUDIO
3/15/17
_TITAN USER MANUAL REV3
22
6.2.2.3.
_TITAN - set up IP address.
To set up IP address for _TITAN, first connect it directly to your workstation using USB cable. Then
start GConManager and select “Config” application. Select your _TITAN frame in devices list on the left
side, then change IP address:
To change any network specific configuration of your _TITAN chassis:
1)
Connect your _TITAN directly to your workstation through USB cable (If connection to _TITAN is
already established through Ethernet cable, this step is not necessary),
2)
Start GConManaqger and go to _CONFIG application.
3)
Then select your _TITAN unit from the left elements tree.
4)
Then change DHCP option to “OFF” (if it is currently “ON”). Unit will restart, and your connection will
re-establish.
5)
Enter IP address that you would like to set, hit Apply button. Unit will restart, and your connection
with _TITAN will be established again.
Now you can disconnect USB cable, and connect _TITAN using Ethernet cable.
