WESAUDIO
3/15/17
_TITAN USER MANUAL REV3
13
6.
Set up GCon Connection.
This chapter goes through possible setups and describes main configuration steps. In general
_TITAN implements two connection types:
USB 2.0+ – which allows to manage up to 10 modules inside.
Ethernet 10/100 – based on UDP protocol (LAN single subnet) which allows to manage up to 10
units from 5 GCon applications* at the same time.
(*) GCon application is any process on your workstation which implements GCon connection, like your
DAW or GConManager. It also means that such applications can be started on different hosts
(workstations) as long as those are located in same LAN subnet.
Please note that this chapter describes how to establish GCon
connection to manage your devices and recall settings, how to
setup audio signal connection is described in the next chapter.
