background image

This warranty on your cleaner commences 

from the original date of purchase and is not 

transferable; please retain your original proof  

of purchase for any warranty claims. This 

warranty is valid only in the country where 

 

the cleaner is purchased.
The cleaner must be operated in accordance 

with these instructions and used only for domestic 

household cleaning to remove DRY dirt and dust 

from  household  carpets,  flooring  and  fabrics. 

This cleaner is not fit to be used as an industrial 

cleaner, and is not designed for the collection 

of vitreous building material including particle 

board, construction products and similar 

products  such  as  wood/fibres,  cement,  fillers, 

fibre glass etc or excessive or frequent sand. The 

infrequent  pick-up  of  these  materials  in  these 

circumstances may be harmful to your cleaner 

and may void the manufacturer’s warranty.
Accessories and consumables including 

dust  bags  and  filters,  unless  defective  in 

manufacture, are not subject to this warranty. 

In order to prolong the life of accessories and 

consumables, regular care and maintenance  

is recommended.
When properly used and cared for, your 

cleaner will render excellent service; refer to  

the instruction manual for further details, 

as misuse or failure to follow the instructions  

makes this warranty void.
In the event of service or advise being needed, 

please contact Electrical Home-Aids Pty Ltd. 

Level 1, Building 2, Brandon Business Park, 530 

Springvale Road, Glen Waverley Victoria 3150, 

AUS: 1800 815 270, NZ: (09) 263 7573, Monday – Friday, 

9am-5pm EST. Email: [email protected]

The decision to repair or replace the cleaner  

is at the sole discretion of Electrical Home-Aids 

Pty Ltd.
Electrical Home-Aids Pty Ltd is unable to 

 

accept responsibility under this warranty for  

any repair work not carried out by an 

authorised International Cleaning Solutions 

Service Agent or from the use of non-genuine 

parts. If any part is no longer available or 

manufactured, Electrical Home-Aids Pty 

Ltd will replace it with a genuine functional 

replacement part. This warranty does not 

apply to the cost of replacing any parts of 

the product due to normal wear and tear, 

alterations, improper installation, physical 

abuse, misuse or accidental damage. Any 

transportation costs involved in the repair of 

defective parts shall be borne by the claimant.
If proof of purchase cannot be provided at the 

time of a warranty claim or service, any work 

carried out on the cleaner is chargeable. The 

repair or replacement of the cleaner under this 

warranty does not extend the original period 

of warranty.

The  benefits  conferred  by  this  warranty  are 

 

in addition to all other rights and remedies  

in respect of the product as outlined under 

the Trade Practises Act and other State and 

Territory laws.
“Our goods come with guarantees that cannot 

be excluded in the Australian Consumer Law. 

You are entitled to a replacement or refund for 

a major failure and for compensation for any 

other reasonably foreseeable loss or damage. 

You are also entitled to have the goods repaired 

or replaced if the goods fail to be of acceptable 

quality  and  the  failure  does  not  amount  to  a 

 

major failure.” 

SAVE tImE, rEGIStEr WArrAntY onlInE! 

www.wertheim.net.au and www.wertheim.co.nz

V1 08/15

1606319

Summary of Contents for SE 9500
















Reviews: