23
22
Ex
tra
cto
r
SE
95
00
mAIntEnAncE
(cont’d)
AccESSorIES
5
6
7
5. Place small belt over back roller and metal cog.
6. Place pivot arm in place and screw in place using the silver screw.
7. Re-attach clear end cap by tightening with the black screws.
8. Return front nozzle to front of unit, by latching from underneath and then
securing with a screw.
Brush removal & large Belt replacement (cont’d)
Filter cleaning
ImPortAnt: the solution line on your SE9500 deep cleaner
has a built-in filter to trap unwanted particles and debris from
clogging the spray tips. Check and clean this filter regularly.
1. Turn off the machine, and unplug it from the outlet. Remove the 2-in-1
water tank. Set aside.
2. Remove the red solution filter cap by inserting a coin or flat head
screwdriver into the slot on top. Turn counter-clockwise to unscrew.
Set aside.
3. Remove the white filter by grasping the post and pulling up and out of the
unit. Rinse the filter under cold water.
note:
Be careful not to drop the filter into the sink or dispose of it.
4. Replace the white filter back into the filter area. Ensure the white filter is
seated properly before placing the red solution filter cap. Replace the red
solution filter cap and turn clockwise to tighten.
Stain trapper tool
Spraying crevice tool
3” tough Stain Brush
upholstery tool
turbo Brush
