background image

4

8.  Ensure the appliance is switched off 

before unplugging.

9.  Do not handle or operate the 

appliance with wet hands and 
follow electrical safety precautions 
at all times.

10.  Extreme caution should be exercised 

when using the appliance on stairs.

11.  Do not attempt to change the 

attachments while the appliance is 
plugged in to mains power supply. 
Switch off and remove plug from mains 
power supply. Use only manufacturer’s 
recommended accessories.

12.  Do not operate the vacuum cleaner 

too close to the heaters, radiators and 
other hot surfaces.

13.  Do not use the appliance to pick 

up flammable items or combustible 

liquids (i.e. petrol, hot ashes cigarettes, 
matches, explosive materials or 
anything burning) or use in areas 
where such substances and items 
may be present.

14.  Do not use the appliance to pick 

up toxic materials (i.e. chlorine 
bleach, ammonia).

15.  Ensure the appliance is disconnected 

from the mains power supply before 
connecting the hose to the unit.

16.  Do not operate or use the appliance 

without the dust bag and/or filters

 

in place.

17.  Before vacuuming, remove any 

large or shaft objects from the floor or 

cleaning surface in order to prevent 

damage to the filter.

18.  If the air inlet, floor head or the 

telescopic wand is blocked, switch off 
the cleaner straight away and remove 
from the mains power. First clear the 
blocked object before attempting to 
start the cleaner again. 

19.  Hold the plug when rewinding onto 

the cord reel. To prevent accidental 
injury do not allow the plug to whip 
when rewinding.

20.  Do not extend the power cable 

beyond the red mark.

21.  Do not leave the appliance 

unattended when it is connected 
to a mains power supply.

22.  Before carry out any maintenance 

service or cleaning the filters, always 

switch off the vacuum cleaner and 
disconnect the plug from power supply. 

SAFEtY InStruCtIonS 

(Cont’D)

Summary of Contents for Deep Clean W3000





















Reviews: