5
RESET BUTTON AT REAR OF POWER BRUSH
ON/OFF
SWITCH
ELECTRONIC VARIABLE
SPEED CONTROL
ALL PURPOSE
FLOOR HEAD
CORD REWIND
ON/OFF
SWITCH
DUST INDICATOR
LIGHTS
FLEXIBLE HOSE
ON/OFF
SWITCH
PARTS IDENTIFICATION
WAND ADJUSTMENT
FAULTS
Do not continue to use this appliance if it appears to be faulty or the supply cord is
damaged. If a fault cannot be rectified, please return to the point of purchase.
If damaged, return the cleaner for repair by an authorised Wertheim Service Centre in
order to avoid a safety hazard.
Consult the trouble shooting guide in this manual if your vacuum cleaner fails to operate
properly. Contact an authorised service agent if the problem persists.
AFTER USE
Switch the cleaner off and remove the plug from the electricity supply. Always switch
off and remove the plug before attaching any accessories or cleaning the appliance.
PROTECTING THE ENVIRONMENT
When you have unpacked the unit, do not simply throw the packing into the household
waste. Take them to an appropriate collecting point for the recycling.
Wertheim
Model 6030
230-240V 50Hz
1700W nom. 1900W max
2100W max with Power Brush fitted
Due to our program of continuous product improvement and innovation, sometimes the
product you buy may differ slightly from the one shown on this product carton
4
TROUBLE SHOOTING
PROBLEM
CAUSE
REMEDY
Motor does not start or
stops.
No power supply.
Check cable, plug
and socket. If still
inoperative, contact
service agent.
Suction force gradually
decreases.
Dust-bag is full,
suction hose, wand is
blocked or dirty filters.
Replace dust-bag,
remove objects from
hose, wand, replace
filters.
Power Brush does not
operate.
Not switched on,
reset-button tripped,
belt broken.
Switch on, press
reset-button, have belt
replaced by service
agent.
2193412-05.indd 4
1/2/08 11:10:02 AM
